Log in
Article search:

Q & A

Got a technical question or a boating query? Post your quandaries here and pick the brains of the WW team. You can also add your answers to others' questions, or browse through previous answers.

Ask a question | Search


useable canals

Are there any canal systems that will not allow narrow boats over 57-60'. I was thinking of the locks.

Asked by: DenisAlcock  | Monday 25 May, 7.15pm | 1 answer


what type of fridge

I have just purchased a sailaway and wander if i should purchase a 12 volt fridge or spend the extra money on a bigger and better inverter and a cheap 240 volt fridge any body any ideas

Asked by: richard williams  | Sunday 24 May, 5.49pm | 1 answer


significance of hydraulic drive?

i am looking to buy my first narrowboat. please can you explain how a hydraulic drive differs from the standard gear box set up?

Asked by: kala  | Thursday 21 May, 11.44pm | 1 answer


lobadini focs engine number ldw 1204

i have a lombadini focs engine in my narrowboat engine number ldw1204.can you help me with information on where i can get a workshop manuel

Asked by: mark walker  | Wednesday 20 May, 9.05am | 1 answer


electric earth ?

I have just brought my first narrowboat and have noticed there is no earth connection between the 240v consumer unit and the hull. Should the hull be earthed when using a shore connection or is the earth though the 240v shore line.

Asked by: Barry  | Monday 18 May, 9.49pm | 1 answer


Battery charging

I have one altenator on my engine, how many batteries could I safely charge using just the one altenator

Asked by: DenisAlcock  | Sunday 17 May, 6.33pm | 4 answers


small boat locks

I'd still like pointers to any small scale/small craft lock systems for punts/dinghies/skiffs anywhere in Europe. Water level difference 3.5-4m. I believe there is a slipway for punts in Cambridge. Names? Locations?

Asked by: jefferson chapple  | Sunday 17 May, 9.23am | 1 answer


pub at Braunston

is the Admiral Nelson at beside the Braunston Flight going to open again. we are going to the rally and festival in June and would like to walk to this pub if open

Asked by: carole dillon  | Tuesday 12 May, 3.56pm | 1 answer


central heating

Hi Folks My boat has a diesel stove with three radiators. I would like to replace the 230v pump with a 12volt pump so as to reduce the demand through the inverter. I wonder if this is possible and has anyone experience of which pump would be suitable.

Asked by: D. B. Sandal  | Friday 8 May, 9.39pm | 2 answers


gangplanks

Hi Folks, I would like to purchase an adjustable for length gangplank. I wondered if anyone knows of a manufacturer. preferably an alloy one for lightness Thanks

Asked by: D. B. Sandal  | Friday 8 May, 3.36pm | no answers yet - add one


Flue for gas water heater

We've owned a narrowboat in the family for several years now and its passed it's BSS with only minor problems however there is a new examiner on the scene and he has just failed a neighbouring boat because the flue for the gas water heater is not tall enough. I have been told that he will fail mine also when it is due this year even though the regulations have not changed. My neighbour has to have a larger hole cut in his roof for the flue to fit, apparently this will cost a few hundred pounds to do. Can anyone give me any advise re this problem, I have just had my boat painted and don't want to start cutting and welding the roof.
Thanks

Asked by: David Grice  | Sunday 3 May, 3.19pm | no answers yet - add one


anchor

Do I need a anchor? I am coming down the avon fron Stratford in May.

Asked by: CHRIS ANDERS  | Saturday 2 May, 9.37am | 5 answers


honda outboard

hi, my friends honda 9.9hp outboard wont slow run, it runs fine further up the rev range but wont tick over ?

Asked by: jake martin  | Tuesday 28 April, 6.53pm | 1 answer


Moorings in the East Midlands

Having taken the plunge and bought a Narrowboat, we realise we know very little about the nitty gritty of getting a mooring. We've found the BW auction site. How else does one search for a mooring around the Braunston Buckby area?
Thanks

Asked by: Peter Skinner  | Thursday 23 April, 3.43pm | 2 answers


artical on using ropes for winding

I understand that your magazine has done an article on how to use ropes to manouvre your narrowboat have had a fruitless on your back issue search engine.Could you help, thankyou

Asked by: lyn hanby  | Wednesday 22 April, 6.12pm | 1 answer


Lightweight Boarding planks/ladders

Last year I believe you showed an aluminium ladder fitted with solid sheet on one side of the rungs and which could be used to rescue overboards. Any ideas where to find?

Asked by: ANDREW HILL  | Monday 20 April, 8.32pm | 2 answers


Engine Oil

My narrowboat is powered by a Bukh 24. The manual advises lubricating oil with a cc or cd rating. It appears that these oils are no longer available. The lowest rating I have been able to find is cf. Will this be ok or can you suggest suitable alternative.
Many thanks.

Asked by: Stewart Hodgson  | Monday 20 April, 12.36pm | 2 answers


Sailaway Diaries

Where can I find the costings for the boat in "The Sailaway Diaries"

Asked by: DenisAlcock  | Thursday 16 April, 6.40pm | 1 answer


Diesel fired stoves

Does anyone sell a small diesel fuelled stove (without back boiler) but with electric ignition suitable for a narrowboat?

Asked by: Richard Holland  | Monday 13 April, 9.32am | 1 answer


Drive Plate Problem


Two years ago I purchased a 60ft narrow boat with a Rushton 6yc engine unit. When purchased we had every intention of replacing this unit with a modern engine and gearbox. The chosen unit was a Mitsubishi type 105 1.76 litre, 42.5 hp with a PRM 260D gearbox supplied complete from a reputable dealer.
After approx 60 running hrs the first drive plate which is a RD 13AA4 collapsed and drive was lost. A further 4 drive plated have malfunctioned in less than 400 hours running.
Various work has been undertake to try and remedy the fault including, the prop re pitched to 17/10 stern bush replaced and shaft cheched for distortion and trueness. A Python Drive was also fitted after the second failure. We are very confident that there is no excessive drag anywhere on the final drive through to the propeller.
R&D has confirmed that the drive plate is the correct one for the current system.
COULD YOU PLEASE OFFER ANY SOLUTION?
garnish

Asked by: Ernie Cheetham  | Sunday 12 April, 3.18pm | no answers yet - add one

Page: 1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16  17  18  19  20  21  22  23  24  25  26  27  28  29  30  31  32  33  34  35  36  37  38  39  40  41  42  43  44  45  46  47  48  49  50  51  52  53  54  55  56  57  58  59  60  61  62  63  64  65  66 


See questions from:   or see all questions